If the MagicQ USB wing periodically disconnects and restarts then check the Windows settings for your USB ports - Windows may be shutting down the USB ports when it incorrectly thinks they are idle.
![driver udmx software driver udmx software](https://www.neven.cz/user/7262/upload/stuff/20663415.jpg)
PC Wing Compacts require MagicQ software version 1.5.8.0 or above.įor all other products the drivers are inĬ:\Program Files (x86) \ChamSys Ltd\Magicq\MagicQ Wing Drivers\FTDI\chamsys.inf If you cannot find "Have Disk" then click on items in the list until you get it.Ĭ:\Program Files (x86)\ChamSys Ltd\Magicq\MagicQ Wing Drivers\PC Wing Compact\CDM 2.08.24 WHQL Certified\ftdibus.inf Select the option "Let me pick from a list of device drivers on my computer".
DRIVER UDMX SOFTWARE INSTALL
Select "Browse My Computer for Driver Software (Locate and Install Driver Software Manually)". When you have identified the device then right click and press Update Driver. If you can not find it then try disconnecting and reconnecting the USB cable to the device - the listing should update and indicate to you which device is being plugged/unplugged. It may be listed as a ChamSys or MagicQ device or just as a FTDI device.
DRIVER UDMX SOFTWARE SERIAL
The MagicQ device is normally listed at the bottom under Universal Serial Bus Controllers but it may be under any other section. This is found in different places depending on the version of Windows, but it can normally be accessed by opening Control Panel and then selecting System, and then selecting Device Manager.ĭevice Manager lists all the devices on your system. The drivers are included in the MagicQ download.Ĭ:\Program Files (x86)\ChamSys Ltd\MagicQ\MagicQ Wing Driversĭisconnect all MagicQ Wings and Interfaces except the one you are trying to install the driver for. MagicDMX devices do not need any drivers - see Section 2.2, “MagicDMX”. MagicQ supports Windows 7, Windows 8 and Windows 10. This does not affect the programming of MagicQ or restrict the output if you have a MagicDMX Full interface.ĭemo mode does restrict some advanced MagicQ functions which are unlocked with MagicQ hardware (Not MagicDMX). When using MagicDMX Basic and MagicDMX Full interfaces demo mode will continue to be shown at the top of the MagicQ window. When MagicQ is started and connects to the device then the green LED is on permanently and the orange flashes faster as it receives data from MagicQ. When first plugged in the MagicDMX alternates green and orange LEDs every second. It can be disable/enabled from Setup, View Settings, Ports, MagicDMX. MagicDMX is enabled as DMX output by default. The MagicDMX Status should say "Connected" and "DMX out".
![driver udmx software driver udmx software](http://www.illutzmination.de/typo3temp/GB/uDMX-FAQ_uDMX-FAQ_uDMX-FAQ_2b1b5708c0.gif)
To confirm that the MagicDMX is operating correctly go to Setup, View System, View status, Interfaces.
![driver udmx software driver udmx software](http://obrazki.elektroda.net/22_1312929919.jpg)
Simply plug in the device and start MagicQ. MagicDMX devices do NOT need any additional drivers – they use HID drivers within the operating system.